Once you've received access to your ATOM dashboard, one of the first things you want to do is add a vehicle in order to be able to test how everything works.

Make sure that you already have your IoT device configured.

See below links to IoT device configuration articles, follow the one relevant to you based on the IoT manufacturer for your devices -

Teltonika (for scooters): https://support.atommobility.com/en/articles/5477550-iot-setup-teltonika

Omni: https://support.atommobility.com/en/articles/5477551-iot-setup-omni

Segway: https://support.atommobility.com/en/articles/5478474-iot-setup-segway

Comodule: https://support.atommobility.com/en/articles/5478475-iot-setup-comodule

Freego: https://support.atommobility.com/en/articles/5534395-iot-setup-freego

Acton: https://support.atommobility.com/en/articles/5534394-iot-setup-acton

Okai: https://support.atommobility.com/en/articles/5542955-iot-setup-okai

Zimo: https://support.atommobility.com/en/articles/5542945-iot-setup-zimo

NIU: https://support.atommobility.com/en/articles/6576442-iot-setup-niu

Then you can proceed with adding your first vehicle:

1) Add your vehicle model. Below you will find a detailed article on how to do it:

https://support.atommobility.com/en/articles/5341436-managing-vehicle-models-in-the-dashboard

2) Add your IoT devices and vehicles in order to be able to connect both. Below you will find a detailed article on how to achieve this:

https://support.atommobility.com/en/articles/5405149-how-to-add-iots-and-vehicles

Now that you've successfully added your first vehicle, you're ready to test how it works!

Try sending some commands directly from the dashboard to your recently added vehicle and see if it responds correctly. This article will help with the process:

https://support.atommobility.com/en/articles/5341130-how-to-send-commands-to-the-vehicles

Reach out to ATOM support in case you need further support!