In order to configure Freego IoT you will need:
- 1 IoT;
- 1 vehicle;
- 1 SIM card with no PIN set, but with an internet connection;
- Freego configuration tool (FreegoBle tool or any other tool from the manufacturer of your IoT devices to connect to your Freego IoT).
Follow the below steps to configure your Freego IoT:
1) Provide your Freego device documentation, so we can check it and make sure our integration matches your Freego device;
2) ATOM prepares a server for your Freego devices, where they will send and receive signals;
3) ATOM provides you with the IP and PORT numbers for your Freego IoT server;
4) Provide this information to Freego, so they can proceed with the setup on their side;
5) Use Freego tool to set the correct APN name of your SIM card provider (you can ask APN name from SIM card provider or find this information by searching in Google);
6) Make sure the PIN code is removed for your SIM card;
7) Set IP number provided by ATOM;
8) Set Port number provided by ATOM;
9) Save the settings;
10) Afterwards add your IoT devices/locks and your vehicles to the dashboard:
If everything is configured and added correctly, you will see that the IoT device/lock is sending its signal through. Check column "Last update: x min.", e.g. (it should show exact time when last signal was received):
