Follow the below steps to configure your Zimo IoT:
1) Provide your Zimo device documentation, so we can check it and make sure our integration matches your Zimo device;
2) ATOM prepares an MQTT server for your Zimo devices, where they will send and receive signals;
3) ATOM provides you with the Remote host, Remote port, MQTT User name/MQTT account name and MQTT password for your Zimo IoT server;
4) Provide this information to Zimo, so they can proceed with the configuration on their side or alternatively Zimo might advise you to do the configuration directly using their BLE tool:
Name: the name for MQTT topic
Device Publish topic: data/KW/scootor/IMEI（KW is Configurable）
Device Subscribe unique topic: IMEI
Device Subscribe common topic: cmd/KW/scootor
IP Address (provided by ATOM)
IP Port (provided by ATOM)
APN (SIM card info from Network provider)
MQTT user (provided by ATOM)
MQTT password (provided by ATOM)
Net user: default blank (SIM card info from Network provider)
Net password: default blank (SIM card info from Network provider)
5) Afterwards add your IoT devices/locks and your vehicles to the dashboard:
If everything is configured and added correctly, you will see that the IoT device/lock is sending its signal through. Check column "Last update: x min.", e.g. (it should show exact time when last signal was received):
