In order to configure Yadea IoT you will need:
- 1 IoT;
- 1 vehicle;
- 1 SIM card with no PIN set, but with an internet connection (not applicable in case the IoT manufacturer has taken care of the SIM cards from their side already).
Follow the below steps to configure your Yadea IoT:
1) Provide your Yadea device documentation, so we can check it and make sure our integration matches your Yadea device;
2) ATOM prepares a server for your Yadea devices, where they will send and receive signals;
3) ATOM provides you with the IP and PORT numbers for your Yadea IoT server;
4) Provide to Yadea the IP and PORT numbers provided to you by ATOM, so yadea can perform the IoT configuration for you;
5) Afterwards add your IoT devices/locks and your vehicles to the dashboard:
If everything is configured and added correctly, you will see that the IoT device/lock is sending its signal through. Check column "Last update: x min.", e.g. (it should show exact time when last signal was received):
